Inversores Híbridos Residenciais ESY
Dispositivos Suportados
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|---|
| Inversor Híbrido Sunhome (monofásico) | HM6 | ❌ | ✅ | ✅ |
Fiação
O MidTeq EMS e os inversores ESY se comunicam via RS485.
Configuração
atenção
Inversores com versão de firmware anterior à seguinte têm um nível mínimo de SoC de 35%. A partir desta versão, essa configuração pode ser ajustada pelo usuário.
Versão mínima requerida: versão MCU 1040, versão DSP 1042.
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the MidTeq EMS will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The MidTeq EMS will scan on those first.